3004 Aluminium Sheet UNS A93004 Aluminum alloy plates and strips are widely employed in several industries, including décor, packaging, building, transportation, electronics, aviation, aerospace, and weapons. Aircraft skins, fuselage frames, and other components are made of aluminum.
Because of its high strength, outstanding corrosion resistance, superior formability, workability, and drawing properties, 3004 aluminum sheet is used in a variety of applications, including beverage cans, chemical equipment, hardware, storage tanks, and lamp bases.
3004 aluminum alloy is used for color plate bases, pressed tile materials (roofing materials, antique building tiles), honeycomb core, honeycomb panel, container foil, lamp holder, cake tray, and vehicle heat shield.
The 3004 series aluminum plates are also made of aluminum-manganese alloys. They outperform 3003 in terms of strength, formability, and corrosion resistance. They require components with greater strength than 3003 alloys.
3004 is an AL-Mn alloy, the most often used anti-rust aluminum. This alloy's strength is low (slightly greater than industrial pure aluminum) and cannot be increased through heat treatment.
As a result, cold working techniques are utilized to enhance its mechanical properties: It has strong plasticity in the annealed state, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, excellent corrosion resistance, weldability, and poor machinability. It is mostly used for low-load parts that require high plasticity and weldability and function in liquid or gas media, such as mailboxes, gasoline or lubricating oil conduits, various liquid containers, and other small-load parts created by deep drawing. Wire is used to produce rivets.
3004 aluminum sheet is easily formable, weldable, and corrosion resistant. Used to process parts and components that require good formability, high corrosion resistance, and good weldability, or that require both these properties and higher strength than 1XXX series alloys, such as kitchen utensils, food and chemical product processing and storage devices, tanks and tanks for transporting liquid products, various pressure vessels and pipes made of thin plates, general utensils, heat sinks, cosmetic boards, photocopier rollers, ship materials.
3004 aluminum sheets and strips are primarily used in the production and storage of chemical products, thin plate processing parts, building materials, building baffles, cable ducts, sewers, various lighting components, beverage cans, corrugated sheets, building materials, colored aluminum plates, and lamp holders.
3004 aluminum sheet is a popular alloy due to its high strength, outstanding formability, workability, great corrosion resistance, and drawing properties. It is not heat treatable and has many of the same uses as 3003 aluminum sheet.
3004 aluminum is quite similar to 3003 aluminum in terms of composition and applications. However, 3004 has increased strength due to a 1% magnesium addition. 3004 aluminum, like all 3xxx aluminum alloys, is not heat treatable. With a minor increase of magnesium, 3004 strength approaches that of 5052 aluminum.
| A1050, A1060, A1070, A1100 | 0.3MM~150MM | 10 MM~2500 MM | 20MM-8000MM | O, H12, H22, H14, H16, H18, H24, H26, etc. | |
| A3003, A3105, A3004 | 0.3MM~150MM | 10 MM~2500 MM | 20MM-8000MM | O, H14, H18, H24, etc. | |
| A5052, A5005, A5083, A5754 | 0.3MM~150MM | 10 MM~2500 MM | 20MM-8000MM | O, H18, H24, H32, H34, H111, H112, etc. | |
| A6061, A6082, A6063 | 0.3MM~150MM | 10 MM~2500 MM | 20MM-8000MM | T4, T6, T651, etc. | |
| A8011 | 0.3MM~150MM | 10 MM~2500 MM | 20MM-8000MM | O, H12, H22, H14, H16, H18, H24, H26, etc. | |
| Packing: Export wooden pallets, craft paper, anti-blushing agent. | |||||
| Standards: ASTM-B209, EN573-1, GB/T3880.1-2006 | |||||
| Application: Mainly used signs, billboards, building exterior decoration, bus body, high-rise buildings and and disk, plate, kitchenware, decorations, reflective devices, etc. |
|||||
| Future Goods: 25-35 days; Ready stock: 7-10 days | |||||
| Kind attention: Specifications can be customized as per the customer's requirements. | |||||
Composition of 3004 aluminum alloy
| 3004 | 0.30 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | – | 0.25 | 0.25 | 0.05 | 0.15 |
Mechanical properties of 3003 aluminium alloy plate
| 3004 | |
| 215 MPa | |
| 170 MPa | |
| 115 MPa | |
| 105 MPa | |
| 70-80 GPa | |
| 0.33 | |
| 10% | |
| 52 |
